Locate the SATA data cables and SATA power cables from your power

supply.

     Connect one end of the SATA data cable to the SATA port on the SSD.

     Connect the other end of the SATA data cable to an available SATA

port on the motherboard.

     Connect one end of the SATA power cable to the power connector on

the SSD.

     Connect the other end of the SATA power cable to an available SATA

power connector from the power supply.

     Position and Secure the SSD:

     Insert the SSD or the SSD with the adapter bracket into the drive bay.

     Make sure the SATA connectors are facing the back or designated side

of the case for easier cable management.

     Align the screw holes on the SSD with the corresponding holes or slots

in the drive bay.

     Use screws provided or appropriate screws to secure the SSD in place.

Be cautious not to overtighten.

     -For NVME SSD / SATA SSD

     Preparation:

     Ensure you have a clean and well-lit workspace.

     Make sure you have a compatible NVMe M.2 SSD and the necessary

tools such as a screwdriver.

     Power Down and Unplug:

     Shut down your computer and unplug the power cable.

     Take necessary precautions to prevent electrostatic discharge by

grounding yourself.

     Identify M.2 Slot:

     Locate the M.2 slot on your motherboard. It is usually labeled and

positioned near the CPU or with other storage connectors.